Ready mixed high temperature adhesive for use with insulation boards, vermiculite boards, high temperature plasterboards and construction boards. Primarily for the joints between boards. The material can be used to fix boards to brickwork, block work etc as long as the wall is flat and the gap does not exceed 5mm otherwise Vitcas HB60 can be used.
Application:
Mix the product thoroughly in the tub first. Surfaces to be joined must be clean, dry and free of dust.
The faces of construction board should be wetted before application.
The material should be applied onto the surface of the boards or the edge of the boards with a 6mm tile comb to give a 3mm bed.
The product is air setting and the setting time is affected by the bed thickness and the ambient temperature. When the material is dry it can be sanded if required.
Disclaimer:
The information given is based on our experience and reports from customers. There are many factors outside our control and knowledge, especially the method and conditions of application which affect the use and performance of our products and for which reason no warranty is given, express or implied. Users should make their own tests to determine the applicability of such information or the suitability of any products for their own particular purposes. The product should be used, as described in our instructions. This information does not replace professional training and does not replace the necessity to comply with health and safety regulations.
